1240 CNS Multiplexer
Proven solution for Radio Status or System Management Monitoring.
1240 CNS Multiplexer, Key Features, IP & non IP
The Ethernet IP interfaces of the 1240 CNS Multiplexer support Radar
Asterix, VoIP ED137 and System Monitoring. Proven ED137B & C VoIP
operation, for up to 16 Ground/Air Radios with a separate IP network for
Radio Status, SNMP or System Management Monitoring. The same CNS
Multiplexer simultaneously supports up to 8 legacy Air/Ground Radios, (4
wire Voice + E&M signalling, with or without phantom earth), permitting
easier transition from existing 25kHz to 8.33kHz Radios. For ATIS
requirements, mostly 4 wire Voice + E&M, the 1240 CNS Multiplexer
supports both current equipment and new VoIP systems.
For Data requirements there are X.21/RS422/RS485 & RS232 (V.24) interfaces,
primarily used on Navigational Aids and some Radars.
Dual power feeds to the 1240 CNS Multiplexer are provided to minimise a single
point of failure.
The 1240 CNS Multiplexer has an 18Vdc to 72Vdc input range, accommodating
site locations having either 24V or 48V DC battery systems (positive or negative
earth).
There is a generous 30dB optical light budget, maintained over the lifetime
of the 1240 CNS Multiplexer, achieved by the built in compensation correcting
sustaining the Laser's output level. 60Km distances should easily be achievable.
Extended versions offer 120Km (over single mode Fibre).
Provides transport of both Ethernet and non-Ethernet interfaces
Ethernet support for Radar Asterix, VoIP ED137 and system monitoring
Proven ED137B & C VoIP operation for multiple ground/air radios
Simultaneous transmission of multiple legacy ground/air radios (4 Wire E&M)
Dual power feeds to minimise single point of failure: 86-264Vac and/or 18-72Vdc
Serial support for nav aids and radar (X.21/RS422/RS485 & RS232)
The FT-1240CNS fibre optic multiplexer provides transport for a variety of voice and data interfaces.
Dual 10/100Mbps Ethernet implemented as two independent links
High speed serial n x 64kbps to 2.048Mbps - X.21, RS422 or RS485
8 x RS232 / V.24 interfaces - Async to 38.4kbps and Sync to 64kbps - Full Flow control DSR/DTR, CTS/RTS & DCD
8 x 4 wire Audio 3400Hz + E&M signalling. phantom earth signalling and -50Vdc
8 x Volt Free Relays
Dual power feeds 86-264Vac & 18-72Vdc
Multi and singlemode fibre options
Specifications
| Item | Description |
|---|---|
| User ports | |
| 8 RS232, Async to 38K4, Sync to 64K | |
| 4/8 E&M Voice | |
| 2 X.21/6 RS422 | |
| 0/8 Relay I/O | |
| Trunk port | |
| Singlemode/Multimode | |
| Guaranteed 30dB power budget | |
| LED Indicators | |
| Alarm | |
| Optical Rx | |
| Full Duplex Operation | |
| Optical Rx Power Level | |
| Master (M) or Slave (S) | |
| Envirmonmental | |
| Temp: 0C to +60C Operating | |
| Humidity: 90%RH to 50C, 80% RH non condensing 30 to 50C | |
| Physical | 435mm x 195mm x 44mm |
| Power Consumption | 20W Max (12W typ) |
A key strength of the 1240 CNS Multiplexer is its versatility to network/integrate all Aviation Manufacturers of:
Comms
Navigational Aids
Surveillance
Equipment/Systems to a (Digital) Control Tower
Combination of Ethernet and Non-IP interfaces provide a cost effective
solution for transitioning to new CNS IP based Systems.
The 1240 CNS Multiplexer assists the Safety Case with its proven operational
track record.
Do you have any questions?
For further information please contact FTI.
You can ask us a question
using the form or please call us on
+44 (0) 24 7641 7070.